Section V AN=08-10-112 TABLE E -- ADDITIONAL POINTS TO MAKE CONTINUITY RESISTANCE READINGS TO GROUND RESISTANCE READINGS MADE UNDER THE SAME CONDITIONS AS FOR TUBE SOCKET READINGS POWER CONNECTOR (175) OUTPUT TRANSFORMER and CHOKE (155-A and B) DYNAMOTOR TERMINAL STRIP Terminal Numbers on Connector Resistance Terminal Numbers on Unit Resistance Readings from low Voltage in High Voltage End 1. 2. 3. 4. 5. 6 7. 8. 150 ohms 500 ohms 1.5 ohms Note A 1.5 ohms Note A 0 500,000 ohms 0 0 1. 2. 3. 4. 5. 6 16 ohms 150 ohms 500 ohms 1200 ohms 25 ohms 270 ohms 0 1.5 ohms Note A 1.5 ohms Note A 270 ohms 500 ohms Note A -- This reading may be found to vary and may be as high as 11 ohms. This condition is normal and jarring the dynamotor will often return the reading to approaximately the value shown. Figure 12 -- Socket Voltages

NEXT Page 18 of 25